The four major elements of the quality of electronic components silicone parts: 1. The quality of silicone raw materials will make it difficult to disassemble the sides of the silicone products. The plasticity of the poor quality silica gel raw materials is not enough, and the tearing tensile strength is obviously insufficient. It goes without saying that the whole process is difficult to tear apart. 2. In the forming stage, the products are formed thicker, so even though the burrs are thicker, the increase in thickness is self-evident, which also causes the difficulty of edge removal. 3. Vulcanization environment elements, the vulcanization temperature should be suitable, the problems of too high or too low will all make it difficult to dismantle the edges. In addition, the level of the vulcanization must also be well controlled. Too long vulcanization will cause the product to become brittle. If the vulcanization time is too short, the vulcanization stage will be useless, so the vulcanization stage should be controlled as much as possible.
In the whole process of daily cake baking, when you take and put the ingredients in the microwave oven and the electric oven, in order to better avoid burns, cloth is generally used to take and put, but the fabric cannot be very heat-insulated, it is very easy Burns and blisters, let me introduce to everyone zichen’s silicone rubber gloves are made of high-quality food-grade stainless steel environmentally friendly silicone materials. The thickened soft silicone material is soft and has the characteristics of reliability and heat resistance. , Non-toxic, odorless, reliable. Beautiful and easy to use, strong and durable.
The appearance design is not simple, unlike the traditional general rubber gloves, there is no floor non-slip design, which is very easy to run off. The silicone rubber gloves designed by silicone products manufacturers have a horizontal ground non-slip texture design. It is not easy to burst when holding things, and it is safe and comfortable to hold. It can easily hold the bowl and plate without slipping. It is a silicone rubber glove that is very worth starting! The vulcanization environment elements, the vulcanization temperature should be suitable, and the problems of too high or too low will all cause difficult to remove the edges. In addition, this level of vulcanization must also be well controlled. If the time is too long, the product will become brittle, and if the vulcanization time is too short, the vulcanization stage will have no effect. Therefore, the thinning stage should be controlled as much as possible.