The hydraulic transmission of rubber seals is a transmission method that uses liquid pressure to transmit energy and activities, called hydraulic transmission. Silica gel products have an open porous structure and can adsorb many substances. It is a good desiccant, adsorbent and catalyst carrier. The adsorption of silica gel is mainly physical adsorption, which can be regenerated and used repeatedly. Add acid to the alkali metal silicate (such as sodium silicate) solution to acidify it, and then add a certain amount of electrolyte to stir to form a silicic acid gel; or add acid or Ammonium salts can also generate silica gel. That is, the hydraulic system uses the medium to achieve movement and energy transmission. The components used to achieve specific functions in the hydraulic system are called hydraulic components.
rubber sealed loop

The energy component of the rubber seal: the hydraulic pump, which supplies the system with pressure oil; the energy device: the device that converts the mechanical energy of the original idea into the pressure energy of the liquid, such as the oil pump. The performance component: converts the pressure energy of the liquid into mechanical energy to drive the load It is a device for linear motion back and forth or rotary motion, such as oil cylinder and motor.

The performance component of the rubber seal ring: refers to the hydraulic cylinder or hydraulic motor, which outputs force and speed under the push of pressure oil;

3. Control components: the components of various valves on the oil circuit. There are three important types of valves: pressure valves, directional valves and flow valves, which control the pressure, flow and flow direction of the oil in the hydraulic system to satisfy the work requirements of the components; 4 , Help components: fuel tanks, tubing, filters, connectors, coolers, accumulators, meters, etc., to provide the necessary prerequisites for the system to ensure the deformity of the hydraulic system. Silica gel products have an open porous structure and can adsorb many substances. It is a good desiccant, adsorbent and catalyst carrier. The adsorption of silica gel is mainly physical adsorption, which can be regenerated and used repeatedly. Add acid to the alkali metal silicate (such as sodium silicate) solution to acidify it, and then add a certain amount of electrolyte to stir to form a silicic acid gel; or add acid or Ammonium salts can also generate silica gel.
Transmission components of rubber seals

The advantages of hydraulic transmission of rubber seals:

1, easily obtain greater force and moment;

2. It is convenient to realize stepless speed regulation, and the speed range is large. The flow rate can be adjusted through the flow valve, which can facilitate stepless speed regulation; 3. It is easy to avoid overload and has high safety. The safety valve is used in the oil circuit to make hydraulic The oil is controlled to a certain limit, which can actively avoid overload or accident; 4. The impact and vibration are small, the work is stable, and the direction can be changed frequently (the oil is compact)

5. The structure is compact, the arrangement is convenient, and remote control can be realized; 6. The operation is simple, and it is easy to realize automation. Combined with electrical control, it is easy to realize complex active work cycle, called mechatronics integration; 7. It is easy to realize standardization and serialization , The hydraulic oil has a lubricating effect, and the components have a long life.

The faults of the hydraulic transmission of the rubber sealing ring:

1. The internal leakage of hydraulic transmission components and the compressible fluid make the transmission helpless to ensure a strict transmission ratio;

2. Contaminants and dust are easy to invade and have a great influence on the contamination of hydraulic oil;

3, temperature changes have a greater impact on the viscosity of hydraulic oil;

4. It is not easy to find the cause when the fault appears, and take the elimination method individually;

5. Oil leakage is easy to occur. Silicone product manufacturers are easy to clean: After using the silicone cake mold, rinse it in clean water and it can be cleaned, or it can be cleaned in the dishwasher. Long life: The nature of the silicone material is very stable, and the cake mold products made are better than other materials. Longer life. Soft and comfortable: Thanks to the softness of the silicone material, the cake mold products are comfortable to the touch, very flexible and not deformed.